MK Concrete Construction
Frederick, Maryland
Whitney Wells, Assistant Project Manager
www.mkconcrete.com

"I first used the Landre Corporation MegaScreed System on a 25,000 Square Foot Pour that had a
defined traffic specification of F-min 60. With the MegaScreed System we achieved these
numbers with minimal grinding."

"My most current (ongoing) use of the MegaScreed System is a 135,000 Square Foot slab for an Airplane Hangar and Maintenance Facility for the West Virginia Air National Guard in Martinsburg, WV. The slab in the Hangar varies in thickness from 8" to 30" with a two way slope around the perimeter and a specified overall measured flatness/levelness of FF(35)/FL(25) with minimum local measured flatness/levelness of FF(25)/FL(17). To further complicate matters, there are two mats of reinforcing steel and dowel baskets throughout, eliminating the usability of a laser screed. We are pouring the slab in 200' x 50' strips (10,000 SF) of approximately 330cy each with 20' strike-offs. With the job 80% complete we are well within the tolerances with the MegaScreed System and have accomplished local measurements as high as FF(80)/FL(60) by a third party testing agency! We are so pleased with the results that we will be submitting this project for The Face Companies Golden Trowel Award recognition upon completion."

"Please feel free to call me at 301-663-0626 with any questions."

Lura Enterprises
West Fargo, North Dakota
Dennis Lura, President
www.luraconcretescreed.com

"Your MegaScreed System solved a problem for us that we have been challenged by all over the country - Hard Ground! I feel that by using our Lura power screed with your MegaScreed System that everyone's a winner, especially our customers and their bottom lines!"

Nimmo & Sons Concrete
Kokomo, Indiana
Dan Nimmo, Owner

"Our last job was 2,600 sq ft residential pour. The existing sub-grade consisted of several layers of old gravel, down to the original cinder base. Using MegaScreed saves about 1-2 hours on a job of this size. We used to wet screed before; now we only use MegaScreed for our flatwork. My crew thinks it's the best money I've ever spent!"

R & R Construction
Shenandoah, Iowa
Randall Derry

"Our company used AccuScreed for years. Now we are using the MegaScreed product. This works great for my company because 1/2" rebar is on almost all of our job-sites. Our soil condition is a good 6" rock base. Set-up time for pouring a slab is cut in half, saving my company lots of money and producing the same quality finished product. Any contractor should start getting jobs done faster and making more profit the first time they try it!"

WM R Lane Construction
Toston, Montana
William Lane

" I do both light and heavy commercial jobs that require 1/8"/10' or better with the newer FF system of flatness and level. We also use a 300lb roller screed on our pours. Before MegaScreed, we previously used wood and steel stakes. I recommend MegaScreed for helping achieve the flatness needed and, at the same time, ability to set grade 30% faster."

Barton Construction
Riverton, Wyoming
Pete Barton

"15,000 sq ft of heavy commercial on compacted pit run conditions was my most recent pour using MegaScreed. In the past, we used native lumber stakes. Would I recommend MegaScreed to other Contractors? You Bet! On a scale of 1-100, I rate MegaScreed 100%."

Granger Builders Inc.
Marengo, Wisconsin
Dan Granger

"The last job we used MegaScreed on was a 3,300 sq ft carwash building that had specified drainage. We laid the pour down by using a Vibra Strike along with our MegaScreed system. We saved about 20% in time and labor by using MegaScreed, and our floors are to print. I recommend this system 100%."