JOB SITE SUCCESS STORIES
Jackson Brothers Construction
Galena, Illinois
Paul Jackson
Paul Jackson owner of Jackson Brothers Construction, Inc. in Galena, Illinois was first introduced to the AccuScreed screed setting method in 1992 at the World of Concrete Expo in Atlanta. In March '92 he purchased his first AccuScreed Kit and has enthusiastically continued using the product ever since.
When asked why he uses the AccuScreed System, Paul responded "it's a big time saver because it has a quicker set-up time." Paul also feels that AccuScreed is "simple and easy to use...especially for new guys!"
Jackson Brothers Construction is the area's largest concrete contractor and that means they emphasis quality workmanship. Paul is impressed with AccuScreed System because it allows his crews to lay a "flatter floor" and deliver a better quality finished product. With AccuScreed, there is no wood in the concrete to absorb ground moisture and cause the concrete to crack.
When asked if the AccuScreed System was worth the investment, Paul responded with an enthusiastic "You bet!" I carry a kit in the truck all the time. It's a real system that works. Once you try it, you'll never go back.
Reynolds Inc.
Cincinnati, Ohio
Tim Mark
AccuScreed makes life a lot easier for us. It's much more cost effective to use than other screed supports. AccuScreed is excellent for flatwork applications with varying elevations. It has helped us to eliminate additional labor time and the headaches associated with wetscreeding.
K & K Concrete & Construction
Escanaba, Michigan
Dane Kuusinen
Using AccuScreed is the only way to go. It is much faster and easier to use than other methods. It will save your company a lot of time and help ensure you get flat slabs. I use it with a one man vibratory screed and get great results!
Sherer Construction
Hudson, Indiana
Richard Sherer
I have been using AccuScreed exclusively on our dairy and bunker silo applications for the past three years. I have been pouring concrete for over 20 years and AccuScreed is the only thing to use, there is no better way. It allows us to save time and be very accurate; our customers are always pleased with the quality of our work.
Stevens Concrete Co.
Charlevoix, Michigan
Rod Stevens
We have used The AccuScreed System since 1994 and are very pleased with the results. We poured
a 2100 Sq. Ft. slab and saved a good one man hour by using AccuScreed. We had sand under the concrete with 6" minimum heavy clay under the sand. On a scale of 1-100, AccuScreed's performance is 90 if 100 is best. I have purchased your new MegaScreed to use with rebar as well. Your products work great!
Coastal Concrete
Panama City, Florida
Kip Hudson
Our job specifications have to comply with on grade "S" Slump. We normally pour around 6000 Sq Ft, light commercial. Our soil condition is soft sand. We save about $50.00 in labor by using AccuScreed.
Richard Schwartz Inc.
Glendive, Montana
Richard Schwartz
"I have two complete sets, AccuScreed and MegaScreed. When all four crews are working, they actually argue with each other for the Kits. We have used these for years on metal decks, for overlays, and on compacted fill."
ECI Construction
Wadesville, Indiana
Mike Tuley
"My last pour was a 20,000 sq ft heavy commercial slab-on-grade. Even though it was standard specifications, I appreciated AccuScreed because it gives a more accurate job. On a scale of 1-100, I rate the performance of AccuScreed 100%. I also recommend it to other Contractors."
Adams Concrete & Construction
Chapin, Iowa
Larry Adams
"My last two jobs I used AccuScreed on involved slab-on-grade and a steel deck. I have no more than 1/4" deflection in 10'. I recommend AccuScreed to other Contractors."
|
