AccuScreed/MegaScreed Benefits...

Increases Speed

One person can set several locations in the same time it takes to set one location using other methods of setting screed. In any type of subgrade, AccuScreed/MegaScreed sets in seconds, not minutes.

Improves Accuracy

AccuScreed/MegaScreed is an inexpensive system that gives SUPERFLAT results: SUPERFLAT = FF100/FL50. Results are better than the ASTM standard of 1/8" deviation in 10'. Super Flatness Example: A 2,600 Sq. Ft. floor was poured using AccuScreed, and the total deviation of the pour equaled less than 3/64"!

Gives a Better Finish

Because of a faster and flatter laydown when using AccuScreed/MegaScreed, you will achieve a better finish without pockets caused by stake removal, or low spots from wet screeding. This allows the Contractor to pour with less slump, which increases concrete strength and decreases required finishing time.

Tested and Proven

This patented device has been developed and proven by a concrete contractor with more than 30 years of successful cement finishing experience. AccuScreed/MegaScreed will pay for itself after one use.